Nothing is more nerve wrecking then being in the middle of a drawing and having your pen dry out. Granted, the pens that I use, Sakura Microns, are relatively inexpensive and possible to find at a local craft store or online from Amazon, yet having to get out and go get more or wait a day or two for it to come in the mail, can slow down progress. Typically I buy six at a time so that I’m not buy pens too often. But every once in blue moon I get a dud; a pen that’s practically dried out when I get it or it dries out much quicker than usually. Instead of tossing it out I got to wondering if there’s a way to refill these things. One of my pens was sacrificed to my curiosity but luckily with some permanent ink on hand that I used for stamping and a pair of needle nose pliers, I found a way to refill my micron pens and it only takes just a few drops of ink to get the pen working again. Below is a brief video clip on how I do it. If you have some microns of your own that you haven’t thrown out yet, you can try this for yourself. You’ll need:
- a dried out micron pen
- a pair of needle nose pliers
- some permanent black ink, which is what microns take. I used Archival Permanent and Waterproof ink from Ranger Ink or you can get in from Amazon.
- a steady hand to gently pull the nib from the pen barrel.
I have yet to try this with colored ink so I don’t know how it would turn out but I suspect that things wouldn’t be any different. If anyone tries it I would be interested to know. Anyhoo, check out the brief video below on how I refill my micron pens.